I must be doing some thing wrong when assembling the front mount connectors. I got the first front mount through the hole and tightened back up. It is easier if you lay your monitor face down on a soft surface (like the bag that originally protected the screen during shipping), loosen the bold, put front mount connector through hole and re-tighten. Is that the sole point of attachment for the center speaker front mount adapter? I ask because once one attaches the two side front mount connectors, my whole speaker assembly acts like a pendulum. if the side speakers are not perfectly balanced, the entire assembly rotates so that the vertical front mount connector is at the bottom of the monitor. Given that the moment arm of the vertical front mount connector, once it overcomes the slight resistance of the monitor mount center bolt, the speed at which the whole front connector assembly rotates is quite fast, often ripping the side speaker velcro mounts apart and throwing the side speakers off and onto the floor. At that point the front mount connector assembly is stable with the center speaker underneath the monitor and no pesky side speakers to upset the assembly’s equilibrium.

Anyone have any ideas as to that I’m doing wrong?

V/R
Bob M.