It has finally arrived!
The assembly took me (alone) around 5-6 hours total incl. the computer setup.
I was afraid that I was gonna run into any problems, but I did not. All parts was fitting
perfectly into each other!
In the video Chris mentions that you have to connect the main monitor arm to the connector. That it was detached in order to save box space. But mine was already connected to it. Which felt nice. 🙂
My biggest problem (if you can call it a problem) was with the acrylic tabletop arms.
It was a very tight fit to get the plastic washers in place. But i managed to push them in place finally.
The keyboard tray arm is a little stiff to move. But mabye I can solve it by loosening the bolts in it?
This is absolutely the best buy I have ever done. I am finally so comfortable I want to be when using my computer.
Never before have I been able to sit and play/work for hours and hours straight. My back does not hurt at all.
The chair gives it the support it needs, and my legs up high on the pedal tray is very comfortable.
The monitor (24″ inch 16:10) is mabye a little high on the lowest settings.
I’m 5.7 (174cm) and my eyes are just below middle on the screen. But it’s not a direct problem..
The small back tilt on the chair and the way that you can sit reclined gives me a good angled view a bit up
to the monitor. It’s still the most comfortable way I have ever used a computer.
But if you want it a bit lower, is it possible to drill two new holes under the now lowest ones?
A big thanks to Chris and everyone at Obutto. This r3v is gonna serv me for many many years to come.
And I’m never going back to a traditional “computer desk” anymore.
I´m using it for work / FPS / MMO games as for now. But I´m gonna start sim race soon now when I have
a real simulator. 🙂
And again sorry for the bad english as I’m swedish.
Some pictures below.
Best regards
Midnite (Magnus)