I was able to add a lot of stability very cheap and easy on my 3 monitor mount. I have grandchildren and it is necessary to have a setup that can be bumped and still stay upright and in the correct position. I used 1 inch schedule 40 PVC pipe cut 44.12 long to place under each of the wing monitors. They were installed with the mount upside down so the pipe slipped into the mounting socket very nicely. The pipes were a little long by design and then angled away from the monitors to provide great stability. I painted them flat black and they fit right in. I then bent come coat hanger that attached via the bezel screws on the center monitor and bent them to capture the edges of the outside monitors at a 45 degree angle. Material was free. 🙂 Just 5 minutes each with some pliers and creativity to “spring” hold the outside monitors correctly. Painted them flat black as well. The setup is perfect. Could make some nice notes on the assembly instruction or in the how-to video for people mounting large monitors. Thanks for the great technology – makes my sim racing really fun and realistic!!